Milesight MS-C8183-PB

Specifications

Sensor: 1 / 2.8 "CMOS matrix with progressive scan

Minimum illumination: Quantity: 0.01 lux (F1.2, auto-amplification incl.); B / W: 0 lux (IR on)

Dynamic range: up to 120 dB

Focal length: 2.8 mm; 3.6 mm

Viewing angle:

          124 ° / 140 ° / 69 ° (2.8 mm)

           89 ° / 103 ° / 49 ° (3.6 mm)

Maximum resolution,

           first stream: 3840x2160

           second stream: 704 × 576

           third stream: 1920 × 1080

Maximum frame rate: 30 fps

Video compression codec: H.265 + / H.265 (HEVC) /H.264+/H.264/MJPEG

Audio compression codec: G .711 / ACC

Network protocols: IPv4 / IPv6, TCP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, DNS, DDNS, DHCP, FTP, NTP, SMTP, SNMP, UPnP, SIP, PPPoE, VLAN, 802.1x, QoS, IGMP, ICMP, SSL

Compatibility: ONVIF Profile S&G, CGI

Events: motion detection, loss of network connection, sound detection

Event action:

           AVI / JPG on FTP / NAS / SD

           SIP call

           JPG to SMTP

           HTTP Notification

 Additional functions:

Motion / sound detection, digital image stabilization, private area hiding, corridor mode, BLC, HLC, 2D DNR, 3D DNR, ROI, Anti-fog, SIP / VoIP

Built-in analytics (optional):

Entry into the zone, exit from the zone, advanced motion detection, impact detection, line crossing, human identification, people counting

Physical characteristics

Network interface: 1 RJ45 10M / 100M Ethernet

SD / SDHC / SDXC memory card slot up to 128 GB

Built-in microphone

Infrared illumination range: up to 20 m

Operating temperature: from -40 ℃ to + 60 ℃

Humidity: 0-90% (no condensation)

Power supply: PoE (802.3af)

Power consumption: 5.2 W (max.) (6.6 W max. With IR)

Dimensions, mm: Ø97.8 × 57.9

Weight: 200g

Optional:

3.6 / 6mm lens

Black case

Video analyst

Key features

To process the video in the camera uses a modern codec H.265 +, which reduces the requirements for video transmission, as well as optimize the cost of storing the archive due to increased by 70-80% encoding efficiency compared to H.264.

High light sensitivity of the sensor that allows to form the accurate color / black-and-white image in the conditions of ultralow illumination (or in complete absence of light thanks to the built-in IR illumination).

The wide dynamic range (WDR 120 dB) allows to transfer the true colors of the image in the conditions of strong counterlight and in scenes with high contrast of illumination.

Built-in microphone to monitor the situation near the camera.

The use of the latest generation of LEDs with additional life cycle and high energy efficiency for additional lighting provides high-quality illumination of the observation area. Smart IR II technology automatically adjusts the light intensity of the field of view, allowing, inter alia, to avoid excessive illumination of the object of observation.

Analytical functions built into the camera allow you to solve many additional tasks without the use of specialized software.

Support for the SIP protocol in all Milesight cameras allows you to organize interaction with IP telephony, video conferencing and other systems working on this protocol, providing a two-way video / audio connection.

For ease of installation, you can adjust the tilt of the camera in three planes, as well as specialized holes on the side of the camera and in the base for cable entry.

A wide range of accessories expands the possibilities of using equipment to solve specific problems.