0
0
0

0.00 грн.

Checkout

HICO 8*1000Mbps ports POE switch

Reviews:
(0)
3 918.96 грн.
Found cheaper?
Buy in one click
Enter the phone number and we will call you back

Product description

To fulfill the demand of High Power POE for network applications with Gigabit transmission,HC-808GP-2G1SFP POE Gigabit Ethernet Switch is an ideal solution. Each 10/100/1000Mbps port of the HC-808GP-2G1SFP features IEEE 802.3af and IEEE 802.3at Power over Ethernet (POE) that combine up to 96/120-watt POE budget on the whole system, It is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / speed dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other network devices by doubling POE power, more than the current conventional 802.3af POE.
All RJ45 copper interfaces of the HC-808GP-2G1SFP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables. 2 extra 10/100/100Mbps RJ45 and 1 extra 1.25Gbps SFP slots can be used for uplink.

Typical applications please refer to following picture
8 Ports Channel 100/1000Mbps PBX Poe Switch VoIP with 2 Uplink and 1 Giga SFP Fiber CCTV IP NetworkFeatures


  1. Complies with IEEE 802.3, 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T

  2. 8-Port 10/100/1000Mbps supports 52V DC power to POE Powered Device

  3. 2-Port 10/100/1000Mbps RJ45 interface for uplink

  4. 1 1.25Gbps SFP interface for uplink

  5. Complies with IEEE 802.3af/802.3at Power over Ethernet End-Span PSE

  6. Up to 8 IEEE 802.3af devices powered

  7. Supports POE Power up to 15.4 watts for each POE port

  8. Up to 4 IEEE 802.3at devices powered

  9. Supports POE Power up to 30 watts for each POE port

  10. 96/120-watt POE budget

  11. Auto detects powered device (PD)

  12. Circuit protection prevents power interference between ports

  13. Remote power feeding up to 100m

  14. Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X

  15. Features Store-and-Forward mode with wire-speed filtering and forwarding rates

  16. IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation

  17. Integrates address look-up engine, supporting 8K absolute MAC addresses

  18. 2M packet buffer

  19. 10K Jumbo frame supports at 1000Mbps duplex mode

  20. IEEE 802.1Q VLAN packet transparency support

  21. Automatic address learning and address aging

  22. Made of metal, desktop size and wall-mount design


Power Supply
Power Supply Mode Mains on load
Voltage Range DC52V
Power Consumption The device < 5W, POE power supply < 96/120W
Network Port Parameter
Network Ports 1~8 Ports: 10/100/1000Mbps Ethernet port, adaptive control; Uplink: 1 SFP 1.25Gbps and 2 10/100/1000Mbps RJ45
Transmission Distance 1~8 Ethernet Port: 0~100m; Mandatory 10 Mbps reach up to 250m; 2 uplink Ethernet Port: 0~100m; 1 SFP: According to different SFP
Transmission Media 1~8 Ethernet Port: Cat5e/6 standard UTP cable; SFP: LC interface optical fiber
POE Agreement IEEE802.3 af/at standards
POE Power Supply Mode End-span method
POE Power Supply Wattage Each port ≤ 30W, Whole device < 96/120W
Network Switch Specification
Network Standard IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T
Swap Mode Store-and-forward
Switch Capacity 22Gbps
MAC Address List 8K
Status Indicators
Power Indicator Light One power light (green)
Optical Fiber Port Indicator One fiber link indication light (green), Green light keeps on when the fiber port is well connected
POE Indicator 1~8 POE indicator light (yellow)
POE Network Port LED 1~10 port (green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data
Protection Level
Surge Immunity Level 3, executive standard: IEC61000-4-5
Electrostatic Protection Touch electric discharge: level 3; Air discharge: level 3; Executive standard: IEC61000-4-2
Operating Environment
Working Temperature -10ºC~55ºC
Storage Temperature -40ºC~85ºC
Humidity (non-congeal) 0~95%
Mechanical Attributes
Dimensions (L*W*H) 222mm x 128mm x 44mm
Color Black
Weight 1kg
Reliability
Mean time between failures (MTBF) > 50000h
Reviews (0)

There are no reviews for this product.